Technical product information for engineering review. Request datasheet, samples, pricing, lead time, or a cross-reference recommendation for this part.
MRS14 product details, applications and specifications
Use this family when a sealed non-contact or magnetically actuated sensing point is required. Final magnet distance, cable length and environmental rating should be confirmed for each installation. The table below summarizes the key selection points; use the model datasheet for dimensions, ratings and ordering confirmation.
1Magnet / float / target
→
2Reed sensor capsule
→
3Signal cable / connector
→
4PLC / controller input
Main specifications for RFQ
Public model
MRS14
Product family
Reed Sensors
Sensing mode
Magnetic proximity, level, float or position sensing
Output
Normally open/closed or model-specific output
Housing
Plastic, metal or molded sensor body depending on series
Cable / connector
Lead wire and connector options by model
Environment
Confirm temperature, media and sealing requirements by RFQ
Datasheet
Available as individual PDF for this model
Datasheet-style view
MRS14 technical data by section
Grouped specification blocks make this model page easier to scan for engineering selection, RFQ review and sample validation.
Contact / output data
Sensing mode
Magnetic proximity, level, float or position sensing
Output
Normally open/closed or model-specific output
Mechanical & mounting
Housing
Plastic, metal or molded sensor body depending on series
Cable / connector
Lead wire and connector options by model
Environment
Confirm temperature, media and sealing requirements by RFQ
Ordering / RFQ notes
Confirm exact ordering code, coil voltage, contact form and termination style before purchase.
Share load voltage/current, load type, duty cycle, ambient temperature and isolation requirement in RFQ.
Use the linked PDF datasheet for package drawing, dimensions and final rating limits.
For reed sensors, confirm pull-in/drop-out distance with the actual magnet, orientation, housing, cable and nearby metal parts.
Product family context: Reed Sensor and Magnetic Switch.
Engineering selection notes
Avoid common specification mistakes
These notes keep product pages useful for engineers while avoiding overclaims. Final ratings remain model- and application-specific.
Pull-in and drop-out are differentActuation distance depends on magnet strength, approach direction, sensor sensitivity, housing, nearby metal and installation geometry. Allow for hysteresis between operate and release points.The whole assembly sets the environment ratingThe reed capsule may be sealed, but IP rating, cable seal, housing material, potting and connector selection determine fluid, temperature and outdoor suitability.Check load protectionPassive reed sensors draw no steady-state power, but switching voltage/current/wattage limits still apply. Inductive and capacitive loads may need suppression or interface circuitry.
Typical applications
Fluid level detection
Door / position sensing
Industrial equipment interlock
Vehicle and machinery monitoring
What to confirm before purchase
Voltage, current, load type and safety margin
Contact form, coil voltage and drive circuit
Mounting, wiring, environmental and compliance requirements
Sample validation quantity and production forecast
FAQ
MRS14 ordering FAQ
These visible answers mirror the FAQ structured data and clarify what buyers should confirm before sample approval or production ordering.
What should be confirmed before ordering MRS14?
Confirm the exact ordering code, coil or control voltage, contact form or output type, voltage/current rating, mounting style, environmental conditions and validation quantity.
Is a PDF datasheet available for MRS14?
Yes. The model page links to an individual PDF datasheet for engineering review and RFQ confirmation.
What applications is this product family used for?
Fluid level detection, Door / position sensing, Industrial equipment interlock, Vehicle and machinery monitoring.
Recommended next steps
MRS14 selection actions
Use these internal paths to move from overview to model comparison, datasheet review and RFQ submission.
Download the original source PDF when available; if no source PDF exists, the checked MiRelay generated datasheet is used for ordering-code interpretation, key selection parameters, mechanical envelope guidance and RFQ checklist.
Original source PDFs are preferred when available. Generated English PDFs are used only when no original source PDF is found; final ratings, drawings and application suitability are confirmed by RFQ.
Download the original source PDF when available; if no source PDF exists, the checked MiRelay generated datasheet is used for ordering-code interpretation, key selection parameters, mechanical envelope guidance and RFQ checklist.
Reviews
There are no reviews yet.